Programming a Shaw remote to control your TV is a relatively straightforward process. Below is a step-by-step guide that will help you program your Shaw remote to your TV.
Step 1: Check Compatibility.
Before proceeding with programming, ensure that your Shaw remote is compatible with your TV model. You can find a list of compatible TVs on the Shaw website or refer to the user manual that came with your remote.
Step 2: Find TV Codes.
Shaw remotes come with a set of codes that correspond to various TV brands. You need to find the code for your specific TV model. You can find the codes in the Shaw remote user manual or on the Shaw website. Look for the section that provides a list of TV codes.
Step 3: Turn on TV and Remote.
Make sure your TV is turned on and your Shaw remote is in working condition. Check the batteries in the remote and replace them if necessary.
Step 4: Enter Programming Mode.
To program the remote, you need to enter programming mode. The process may vary slightly depending on the remote model you have. Here is a general method:
a. Press and hold the “Setup” or “Menu” button on the remote. Hold it until the LED light on the remote turns on.
b. Release the button.
Step 5: Enter TV Code.
Once you are in programming mode, you can enter the TV code. The code is a series of digits that correspond to your TV brand and model. Enter the code using the number buttons on the remote.
See also: 4 Ways to Turn on Vizio TV without Remote
Step 6: Test the Code.
After entering the code, press the “Power” button on the remote to see if the TV turns off. If the TV turns off, it means the code was programmed successfully. If not, try entering a different code from the list until you find the correct one.
Step 7: Lock the Code.
Once you have found the correct code, lock it in to ensure the remote retains the programming even after changing the batteries. Here’s how:
a. Press and hold the “Setup” or “Menu” button again until the LED light blinks twice.
b. Release the button.
Step 8: Test Remote Functions.
Now that your Shaw remote is programmed to control your TV, test other functions such as volume control, channel selection, and input switching. Make sure all the buttons on the remote work correctly with your TV.
Step 9: Troubleshooting.
If the TV does not respond to the programmed remote, try the following troubleshooting steps:
a. Repeat the programming process and enter the code again.
b. Ensure that you are within range of the TV and there are no obstructions between the remote and the TV.
c. Check the batteries in the remote and replace them if necessary.
d. Consult the user manual or contact Shaw customer support for further assistance.
Step 10: Additional Features.
Shaw remotes often come with additional features such as controlling other devices like DVD players or sound systems. Consult the user manual or Shaw website to learn how to program these additional features if desired.
That’s it! By following these steps, you should be able to program your Shaw remote to control your TV. Enjoy the convenience of using a single remote to operate your TV and other devices.
See also: How to Pair a ROKU Remote
Originally posted on May 18, 2023 @ 5:14 pm
2 thoughts on “How to Program Shaw Remote to TV”